High Pressure Latch Down Cementing Plugs

Top-Co Products' cementing plugs are used during cementing operations for wiping the casing ID clean of drilling fluids and providing separation between mud, spacers, and cement.

They also prevent over displacement of the cement slurry and indicate when the cementing job is complete. All plugs are designed to fit in conventional cementing heads.

Making it better

Cementing plugs designed and tested for superior performance.

The Type 779 HP Bottom latch-down plug, when used with a Type 778 HP latch-down plug and a latch down valve cap receptacle, completes an HP (10,000 psi Bump pressure) double latch down plug system. The system ensures a positive pressure seal upon bumping and a latch to prevent plug back-off due to pressure from below. The Type 779, when coupled with a Type 778 also assists in holding limited back pressure in case of float failure.

Features

Available in sizes 4-1/2” ,5” and 5-1/2”

Standard Material: Natural Rubber - Intermittent service Temperature (°F): -65 to 180

High Temp. Material: HNBR - Intermittent service Temperature (°F): -40 to 300

Plug is available in standard and flex plug configurations

PDC drillable

Available in single or double plug configurations

Downloads

Type 778 HP Latch Down Plug Download

Type 779 HP Double Latch Down Plug Download