Insights

Posted on November 9, 2018

Rubicon Purchasing PO Terms and Conditions 11-18

Insights

Posted on November 9, 2018

Global Terms and Conditions of Sale Service and Rental (final) November 2018

Deployment Enhancement Brochure
News & Media
Deployment Enhancement Brochure

Posted on November 9, 2018

  Deployment Enhancement Brochure

Composite Plugs - The difference can be material!
Insights
Composite Plugs - The difference can be material!

Posted on October 16, 2018

For a product group labeled Composite Plugs, there sure are a lot of different materials used in the construction of frac plugs. Even in the category of composite material there are different types of...

Read more
Composite Plug Innovation: Sealing Matters
Insights
Composite Plug Innovation: Sealing Matters

Posted on August 21, 2018

Innovation of Plug & Perf completion technology over the past 10 years has been focused on reducing or eliminating the difficulty of removing the plugs after the completion. So much so, operators...

Read more
Drilling Solutions Brochure
News & Media
Drilling Solutions Brochure

Posted on August 14, 2018

Drilling Solutions Brochure

Dissolve your worries: A new option for extended reach completion design
Insights
Dissolve your worries: A new option for extended reach completion design

Posted on July 18, 2018

North American operators are reporting longer and longer average lateral lengths in the quest to drive efficiencies for their operations. For instance, a large operator in the Permian Basin has...

Read more
Primary Cementing Equipment Brochure
News & Media
Primary Cementing Equipment Brochure

Posted on June 26, 2018

Rubicon Primary Cementing Equipment Brochure  

Rubicon Built, Logan Made
News & Media
Rubicon Built, Logan Made

Posted on May 30, 2018

In a small machine shop in North Houston in 1971, the Right Machine Company began manufacturing products. In 1999, Logan Oil Tools and its employees built on the success of Right Machine and quickly established...

Read more
Setting Up for Success: Owen Style Compact Setting Tool
Insights
Setting Up for Success: Owen Style Compact Setting Tool

Posted on May 1, 2018

Many of the issues encountered during a frac job can be attributed to the setting tool operation, redress, and running procedures. It’s critical to understand these tools when planning your next completion. I...

Read more
Insights

Posted on April 5, 2018

Setting up for Success: Wireline Setting Tools have a major impact on Plug & Perf Operations
Insights
Setting up for Success: Wireline Setting Tools have a major impact on Plug & Perf Operations

Posted on April 4, 2018

Matthew Crump, P.E., Vice President, Completion Solutions: Up to 800,000 composite plugs could be run in North America this year. I’ve been in and around the composite plug business now since 2008...

Read more
Intelligent Iron! A Primer on Casing Equipment
Insights
Intelligent Iron! A Primer on Casing Equipment

Posted on March 9, 2018

Alfredo Sanchez, P.E., VP Well Construction: This article is the first in a series intended to be a primer on casing equipment (aka primary cementing equipment, PCE). In addition to providing a fundamental...

Read more
Let's explore...RotationABILITY™ for challenging Tubular / Completion Deployment Applications
Insights
Let's explore...RotationABILITY™ for challenging Tubular / Completion Deployment Applications

Posted on February 16, 2018

Benoit Deschamps, Global Applications Engineer Manager: As a typical challenge associated with highly deviated, Horizontal or ERD wells, during the ‘conventional’ (non-rotating slack-off mode) completion...

Read more
Improving Cement Placement and Long-Term Wellbore Integrity Through Fit-For-Purpose Casing Centralization
Insights
Improving Cement Placement and Long-Term Wellbore Integrity Through Fit-For-Purpose Casing Centralization

Posted on February 16, 2018

Alfredo Sanchez, P.E., VP Well Construction: In this article, I will be discussing the following topics: Displacement Efficiency and Controlling Parameters Formation Interactions Cement and...

Read more
Composite Plug Milling: 4.5
Insights
Composite Plug Milling: 4.5" Casing

Posted on February 16, 2018

Matthew A. Crump, P.E., VP Lower Completions: In my previous milling article, here, I highlighted the two most popular choices for milling composite plugs in 5.5” Casing. The two choices are really...

Read more
RotationABILITY
Insights
RotationABILITY

Posted on October 5, 2017

Coined by Rubicon Oilfield International, the concept of RotationABILITYTM combines state-of-the-art downhole technologies with advanced applications engineering analysis, two Rubicon core competencies.   RotationABILITYTM...

Read more
Longer Laterals are Not a Fad
Insights
Longer Laterals are Not a Fad

Posted on October 5, 2017

In early April Hart’s E&P published an article from DrillingInfo that looked at the relative performance of operators in the Delaware Basin. The Delaware Basin in West Texas/East New Mexico has...

Read more
Real Success: RzrFRAC™ Composite Frac Plug
Insights
Real Success: RzrFRAC™ Composite Frac Plug

Posted on September 26, 2017

AUTHOR: MATTHEW CRUMP In my previous article (RzrFRAC: The Next Step in Composite Technology) I highlighted the design features of the RzrFRACTM Composite Frac plug that have brought value to our customers. Each...

Read more
RzrFRAC™: The Next Step in Composite Plug Technology
Insights
RzrFRAC™: The Next Step in Composite Plug Technology

Posted on August 22, 2017

AUTHOR: MATTHEW CRUMP In my first two composite plug articles (Longer laterals are not a Fad & Until Now, Innovation = Less of the Same) I highlighted that there has been exponential growth in...

Read more
Until Now, Innovation = Less of the Same
Insights
Until Now, Innovation = Less of the Same

Posted on August 9, 2017

AUTHOR: MATTHEW CRUMP In the beginning In my previous article I highlighted the fact that operators are drilling longer laterals and breaking those lateral up into even more stages. The result is...

Read more